| Matériel | Module | Paramètre
|
|---|---|---|
| NCR53c810/820/720, NCR53c700/710/700-66 | 53c7,8xx.o | |
| AM53/79C974 PC-SCSI Driver | AM53C974.o | AM53C974= host-scsi-id, |
| Qlogic PCI-Basic | target-scsi-id,max-rate, | |
| max-offset | ||
| Most Buslogic (now Mylex) | BusLogic.o | BusLogic_Options= option,option,... |
| cards with ``BT'' part number | (See /usr/src/linux/drivers/scsi/README.BusLogic) | |
| NCR53c406a.o | ncr53c406a= io_port[,IRQ[,FASTPIO]] | |
| ncr53c406a io= io_port irq= IRQ fastpio= FASTPIO | ||
| Advansys SCSI Cards | advansys.o | |
| Adaptec AHA 152x | aha152x.o | aha152x= io_base,IRQ,scsi_id,reconnect,parity |
| Adaptec AHA 1542 | aha1542.o | aha1542= io_base,buson,busoff,dmaspeed |
| Adaptec AHA 1740 | aha1740.o | |
| Adaptec AHA-274x, AHA-284x, | aic7xxx.o | aic7xxx= string |
| AHA-29xx, AHA-394x, AHA-398x, | ||
| AHA-274x, AHA-274xT, AHA-2842, | ||
| AHA-2910B, AHA-2920C, AHA-2930/U/U2, | ||
| AHA-2940/W/U/UW/AU/U2W/U2/U2B/, | ||
| U2BOEM, AHA-2944D/WD/UD/UWD, | ||
| AHA-2950U2/W/B, AHA-3940/U/W/UW/, | ||
| AUW/U2W/U2B, AHA-3950U2D, | ||
| AHA-3985/U/W/UW, AIC-777x, AIC-785x, | ||
| AIC-786x, AIC-787x, AIC-788x , AIC-789x, | ||
| AIC-3860 | ||
| Data Technology Corp DTC3180/3280 | dtc.o | |
| DTP SCSI host adapters (EATA/DMA) | eata.o | eata= port0,port1,port2,... options |
| PM2011B/9X ISA, PM2021A/9X ISA, PM2012A, | eata io_port= port0,port1,port2,...option=value | |
| PM2012B, PM2022A/9X EISA, PM2122A/9X, | ||
| PM2322A/9X, SmartRAID PM3021, PM3222, | ||
| PM3224 | ||
| DTP SCSI Adapters PM2011, PM2021, PM2041, | eata_dma.o | |
| PM3021, PM2012B, PM2022, PM2122, PM2322, | ||
| PM2042, PM3122, PM3222, PM3332, PM2024, | ||
| PM2124, PM2044, PM2144, PM3224, PM3334 | ||
| DTP EATA-PIO boards | eata_pio.o | |
| Future Domain TMC-16x0- based cards | fdomain.o | fdomain= io_base,IRQ[, ADAPTER_ID] |
| TMC-1800, TMC-18C50, TMC-18C30, | ||
| TMC-36C70, Future Domain TMC-1650, | ||
| TMC-1660, TMC-1670, TMC-1680, | ||
| TMC-1610M/MER/MEX, TMC-3260 (PCI), | ||
| Quantum ISA-200S, ISA-250MG | ||
| Adaptec AHA-2920A (PCI) (NOT AHA-2920C) | ||
| NCR5380 and NCR53c400 cards | g_NCR5380.o | ncr5380= io_port,IRQ,dma ncr53c400= io_port,IRQ |
| ncr5380 io= io_port irq= IRQ dma= dma | ||
| ncr53c400 io= io_port irq= IRQ | ||
| GDT ISA/EISA/PCI Disk Array Controller | gdth.o | gdth= IRQ0,IRQ1,IRQ2,... options:values |
| IOMEGA MatchMaker parallel port SCSI adapter | imm.o | |
| Always IN2000 ISA SCSI card | in2000.o | in2000= setup_string:value |
| in2000 setup_string=value | ||
| Initio INI-9X00U/UW SCSI host adapters | initio.o | |
| AMI MegaRAID 418, 428, 438, 466, 762 | megaraid.o | |
| NCR SCSI controllers with 810/810A/815/ | ncr53c8xx.o | ncr53c8xx= option1:value1,option2:value2,... |
| 825/825A/860/875/876/895 chipsets | ncr53c8xx= option1:value1 option2:value2... | |
| Pro Audio Spectrum/Studio 16 | pas16.o | pas16= port,irq |
| IOMEGA PPA3 parallel port SCSI host adapter | ppa.o | |
| Perceptive Solutions PSI-240I EIDE | psi240i.o | |
| QLogic Fast SCSI FASXXX ISA/VLB/PCMCIA | qlogicfas.o | |
| QLogic ISP2100 SCSI-FCP | qlogicfc.o | |
| QLogic ISP1020 Intelligent SCSI cards | qlogicisp.o | |
| IQ-PCI, IQ-PCI-10, IQ-PCI-D | ||
| Seagate ST01/ST02 | seagate.o | controller_type=1 base_address= base_addr irq= irq |
| Future Domain TMC-885, TMC-950 | seagate.o | controller_type=2 base_address= base_addr irq= irq |
| Cards with the sym53c416 chipset | sym53c416.o | sym53c416= PORTBASE[, IRQ] |
| sym53c416 io= PORTBASE irq= IRQ | ||
| Trantor T128/T128F/T228 SCSI Host Adapter | t128.o | |
| Tekram DC390 and other AMD53C974A | tmscsim.o | tmscsim= ID, SPEED |
| based PCI SCSI adapters | ||
| UltraStor 14F/34F SCSI host adapters | u14-34f.o | u14-34f= io_port1,io_port2,...io_port10 |
| (14F, 24F, 34F) | u14-34f io_port= io_port1,io_port2,...io_port10 | |
| UltraStor 14F, 24F, and 34F | ultrastor.o | |
| WD7000-FASST2,WD7000-ASC, | wd7000.o | wd7000= IRQ,dma, io_port |
| WD7000-AX/MX/EX | wd7000 io= io_port irq =IRQ dma =dma | |
Voici quelques exemples :
| Configuration | Exemple
|
|---|---|
| Adaptec AHA1522 at port 330, IRQ 11, SCSI ID 7 | aha152x=0x330,11,7 |
| Adaptec AHA1542 at port 330 | bases=0x330 |
| Future Domain TMC-800 at CA000, IRQ 10 | controller_type=2 base_address=0xca000 irq=10 |
Quand un paramètre a besoin de virgules, faites bien attention à ne pas mettre de blanc après la virgule