Précédent	Table des matière	Suivant

4.15 Paramètrage post-installation et tests

Once you've installed MySQL (from either a binary or source distribution), you need to initialize the grant tables, start the server and make sure that the server works okay. You may also wish to arrange for the server to be started and stopped automatically when your system starts up and shuts down.

Normally you install the grant tables and start the server like this:

shell> cd mysql_installation_directory
shell> ./bin/mysql_install_db
shell> ./bin/safe_mysqld &

Testing is most easily done from the top-level directory of the MySQL distribution. For a binary distribution, this is your installation directory (typically something like `/usr/local/mysql'). For a source distribution, this is the main directory of your MySQL source tree.

In the commands shown below in this section and in the following subsections, BINDIR is the path to the location in which programs like mysqladmin and safe_mysqld are installed. For a binary distribution, this is the `bin' directory within the distribution. For a source distribution, BINDIR is probably `/usr/local/bin', unless you specified an installation directory other than `/usr/local' when you ran configure. EXECDIR is the location in which the mysqld server is installed. For a binary distribution, this is the same as BINDIR. For a source distribution, EXECDIR is probably `/usr/local/libexec'.

Testing is described in detail below:

1. If necessary, start the mysqld server and set up the initial MySQL grant tables containing the privileges that determine how users are allowed to connect to the server. This is normally done with the mysql_install_db script:

   shell> scripts/mysql_install_db
   

   Typically, mysql_install_db needs to be run only the first time you install MySQL. Therefore, if you are upgrading an existing installation, you can skip this step. (However, mysql_install_db is quite safe to use and will not update any tables that already exist, so if you are unsure what to do, you can always run mysql_install_db.) mysql_install_db creates six tables (user, db, host, tables_priv, columns_priv and func) in the mysql database. A description of the initial privileges is given in section 6.10 Droits initiaux. Briefly, these privileges allow the MySQL root user to do anything, and allow anybody to create or use databases with a name of 'test' or starting with 'test_'. If you don't set up the grant tables, the following error will appear in the log file when you start the server:

   mysqld: Can't find file: 'host.frm'
   

   The above may also happens with a binary MySQL distribution if you don't start MySQL by executing exactly ./bin/safe_mysqld! You might need to run mysql_install_db as root. However, if you prefer, you can run the MySQL server as an unprivileged (non-root) user, provided that user can read and write files in the database directory. Instructions for running MySQL as an unprivileged user are given in section 18.8 Comment faire tourner MySQL en tant qu'utilisateur normal. If you have problems with mysql_install_db, see section 4.15.1 Problèmes avec mysql_install_db. There are some alternatives to running the mysql_install_db script as it is provided in the MySQL distribution:
   • You may want to edit mysql_install_db before running it, to change the initial privileges that are installed into the grant tables. This is useful if you want to install MySQL on a lot of machines with the same privileges. In this case you probably should need only to add a few extra INSERT statements to the mysql.user and mysql.db tables!
   • If you want to change things in the grant tables after installing them, you can run mysql_install_db, then use mysql -u root mysql to connect to the grant tables as the MySQL root user and issue SQL statements to modify the grant tables directly.
   • It is possible to recreate the grant tables completely after they have already been created. You might want to do this if you've already installed the tables but then want to recreate them after editing mysql_install_db.
   For more information about these alternatives, see section 6.10 Droits initiaux.
2. Start the MySQL server like this:

   shell> cd mysql_installation_directory
   shell> bin/safe_mysqld &
   

   If you have problems starting the server, see section 4.15.2 Problèmes avec le serveur MySQL.
3. Use mysqladmin to verify that the server is running. The following commands provide a simple test to check that the server is up and responding to connections:

   shell> BINDIR/mysqladmin version
   shell> BINDIR/mysqladmin variables
   

   The output from mysqladmin version varies slightly depending on your platform and version of MySQL, but should be similar to that shown below:

   shell> BINDIR/mysqladmin version
   mysqladmin  Ver 6.3 Distrib 3.22.9-beta, for pc-linux-gnu on i686
   TCX Datakonsult AB, by Monty
   
   Server version          3.22.9-beta
   Protocol version        10
   Connection              Localhost via UNIX socket
   TCP port                3306
   UNIX socket             /tmp/mysql.sock
   Uptime:                 16 sec
   
   Running threads: 1  Questions: 20  Reloads: 2  Open tables: 3
   

   To get a feeling for what else you can do with BINDIR/mysqladmin, invoke it with the --help option.
4. Verify that you can shut down the server:

   shell> BINDIR/mysqladmin -u root shutdown
   

5. Verify that you can restart the server. Do this using safe_mysqld or by invoking mysqld directly. For example:

   shell> BINDIR/safe_mysqld --log &
   

   If safe_mysqld fails, try running it from the MySQL installation directory (if you are not already there). If that doesn't work, see section 4.15.2 Problèmes avec le serveur MySQL.
6. Run some simple tests to verify that the server is working. The output should be similar to what is shown below:

   shell> BINDIR/mysqlshow
   +-----------+
   | Databases |
   +-----------+
   | mysql     |
   +-----------+
   
   shell> BINDIR/mysqlshow mysql
   Database: mysql
   +--------------+
   |    Tables    |
   +--------------+
   | columns_priv |
   | db           |
   | func         |
   | host         |
   | tables_priv  |
   | user         |
   +--------------+
   
   shell> BINDIR/mysql -e "select host,db,user from db" mysql
   +------+--------+------+
   | host | db     | user |
   +------+--------+------+
   | %    | test   |      |
   | %    | test_% |      |
   +------+--------+------+
   

   There is also a benchmark suite in the `sql-bench' directory (under the MySQL installation directory) that you can use to compare how MySQL performs on different platforms. The `sql-bench/Results' directory contains the results from many runs against different databases and platforms. To run all tests, execute these commands:

   shell> cd sql-bench
   shell> run-all-tests
   

   If you don't have the `sql-bench' directory, you are probably using an RPM for a binary distribution. (Source distribution RPMs include the benchmark directory.) In this case, you must first install the benchmark suite before you can use it. Beginning with MySQL 3.22, there are benchmark RPM files named `mysql-bench-VERSION-i386.rpm' that contain benchmark code and data. If you have a source distribution, you can also run the tests in the `tests' subdirectory. For example, to run `auto_increment.tst', do this:

   shell> BINDIR/mysql -vvf test < ./tests/auto_increment.tst
   

   The expected results are shown in the `./tests/auto_increment.res' file.

	Table des matières
Précédent		Suivant